
Concrete to your specification
Products
Our products
Every mix is developed and tested against the project specification. Tell us the application and we’ll confirm the right concrete.
Conventional ready-mix
Concrete for foundations, columns, beams and slabs, designed to the engineer’s specified grade and the workability needed for placement.
High-strength
For structural elements subjected to significant loading, with mixes developed to meet strength, workability and durability requirements.
High-performance
Developed around enhanced requirements for strength, durability, workability or permeability, as defined by the project specification.
Self-compacting
Flowable concrete that fills formwork and passes through congested reinforcement under its own weight, without mechanical vibration.
Mass & low-heat
For large-volume placements such as raft foundations, where heat generation and thermal cracking risk need careful control.
Fibre-reinforced
Steel or synthetic fibres to improve crack control, toughness and post-cracking performance.
Slipform
For continuous pours on building cores, shear walls and other vertical structures.
Durable & waterproofing
Designed for specified durability and permeability requirements through mix proportions and approved admixture systems.
Low-shrinkage
Formulated to manage drying shrinkage and related cracking risk.
Lightweight
Lower-density concrete where weight is a design consideration, to a specified density and strength.
Quick-setting
A shorter setting time, developed around the time available for placement.
High-workability
Enhanced flow and workability for placements where access or reinforcement makes compaction difficult.
Heavyweight
Higher-density concrete where mass is a design consideration, to a specified density and strength.
Ultra-high-performance (UHPC)
For demanding strength and durability requirements, developed around the project specification.
Precast mixes
Mixes developed around the casting, curing and demoulding requirements of precast production.
Green concrete
Mixes using supplementary cementitious materials such as GGBS, fly ash and silica fume, where suitable and approved, to meet strength, durability and environmental requirements.
Shotcrete
Concrete placed by spraying rather than pouring into formwork, designed for the application and placement method.
Lean mixes & flow-crete
Include the intended use and performance requirements in your enquiry so the appropriate mix can be confirmed.
Green concrete
Sustainability & Durability
Lower-impact mixes that still meet the specified strength and durability.
Sustainable and SCM-Based Concrete
We develop concrete mixes using GGBS, fly ash and silica fume, where suitable and approved, to meet the project’s strength, durability and environmental requirements.
Proven in our laboratory
Trial batches are cast, cured and tested in-house, so each lower-carbon mix is shown to meet its specified strength and durability before it reaches site.

Placement
Pumping and placement
Static pumps
22 static pumps transfer concrete through a pipeline to elevated decks and high-rise structures, including Stella Maris in Dubai Marina.
Mobile pumps
14 mobile pumps with booms of 56 m (4), 55 m (1), 43 m (8) and 36 m (1), for placement where a mixer cannot discharge directly.

Placing booms & distributors
Placing booms, Molly pumps and distributors place concrete at the point of the pour, including on high-rise decks.
Large pours
Ready for raft foundations and hot weather
Production for large pours
Eight batching plants with a combined output of 680 m³ per hour supply mass pours and raft foundations from three Dubai depots.Temperature control
Each depot has two large flake-ice plants and a chilled-water system to help control concrete temperature during production.Hot-weather concreting
Depending on the specification, chilled mixing water, ice, suitable admixtures and coordinated delivery keep concrete within the project’s temperature limits.
